All LEDs on the front
panel are flashing |
Electrodes have accumulated a coating which prevents adequate electrical
current from flowing between them.
- Clean the electrodes, as per the MAINTENANCE section.
Faulty electrical connection to electrodes.
- Check the cable from the Eco-Oxidizer control box to the Electrode Cartridge.
Ensure that the electrical connections at the Electrode Cartridge are clean,
tight and without excessive corrosion.
- Faulty connections can be repaired by persons with technical experience, or
can be returned to Bioniser for repair.
If all the lights on the eco-oxidizer are flashing then simply add calcium hardener to the pool to a level of 250 or so.
Another solution is to add a 10 kg bag of pool salt (50,000 litre pool) and brush in. Both these solutions increase the water’s
conductivity level so that the eco-oxidizer can deliver the chosen level of power to the oxidizing cells without restriction.
Situation: The lights will stop flashing once this is completed.
If the lights still flash after these “fixes” have been tried then please contact Bionizer to arrange an inspection of the product |